Resilient seated gate valves with a soft seal disc, completely encapsulated with rubber.  
Designed with the application of new technology providing for easy operation, no clogging and no corrosion, good resilient features and long service life.
    SERVICE:  On / Off
  

MODEL: 2009 / 2015
SIZE: 2" to 24"
PRESSURE:  Class 125 
TEMPERATURE: 14°F to 248°F
FLANGE: ANSI Class 150/300
OPERATION: Handwheel, nut or gear

  

MODEL: 2015PE (Pipe End)
SIZE: 2" to 12"
PRESSURE:  232 PSI
TEMPERATURE: 14°F to 248°F
OPERATION: Handwheel, nut or gear

  

STANDARD: AWWA C509 / C515

    ADVANTAGES:
  • Advanced design - less operation torque and high abrasion resistance.
  • Forged Stem provides stronger stem operation and less moving parts.
  • Disc is covered by high grade rubber compatible with potable water standards.
  • High-tech rubber curing with precise geometry dimensions.
  • More resilient and strong adhesive to ductile casting.
  • The series of three O-rings seals are designed to prevent stem leakage.
  • O-rings repalcement implemented without removing valve from the main line.
  • Epoxy resin powder coating min 250 micron inside and outside surfaces per AWWA C550.

    APPLICATIONS:
  • Potable Water Services
  •  Water supply and Sewage
  • Oil /Gas /Petrochemical
  • Industrial / Commercial
  • OEM / HVAC
  

              NOTES:
  1. Valves  can be supplied with multi-turn electrical  actuators.
  2. Valves provide enhanced flow rate characteristics with reduced upper body dimensions.
  3. Buna-N coated wedge can be used for non-flammable oil applications.

MODEL: 2009L
SIZE: 30" to 72"
PRESSURE:  150 PSI
TEMPERATURE: 14°F to 248°F
FLANGE: ANSI Class 125 / 250
OPERATION:   Bevel or Spur Gearbox
STANDARD: AWWA C509

  

    MATERIALS SPECIFICATION:
  • BODY: Ductile Iron / Cast Iron
  • BONNET: Dusctile Iron / Cast Iron
  • WEDGE: Ductile / Cast Iron, EPDM / Buna-N Coated
  • STEM: Stainless Steel AISI 420
  • STEM NUT: Brass / Bronze
  • O-Ring: EPDM / Buna-N
  • GASKET: EPDM / Buna-N
  • GLAND: Ductile Iron
  • HANDWHEEL: Ductile Iron

    APPLICATIONS:
  •  Water supply and Sewage
  • Oil /Gas /Petrochemical
  • Industrial / Commercial
  • OEM
  

    SERVICE:  On / Off
  

    MATERIALS SPECIFICATION:
  • BODY / BONNET: Ductile Iron
  • WEDGE: Ductile Iron, EPDM Coated
  • STEM: Stainless Steel AISI 431
  • STEM NUT: Brass
  • O-Ring / GASKET: EPDM 
  • BONNET ADAPTER: Ductile Iron
  • FASTENERS: Stainless Steel AISI 304

    MATERIALS SPECIFICATION:
  • BODY / BONNET: Ductile Iron
  • WEDGE: Ductile Iron, Rubber Coated
  • STEM: Stainless Steel AISI 431
  • STEM NUT: Brass
  • O-Ring: Buna-N

    SERVICE:  On / Off
  

    APPLICATIONS:
  •  Water supply
  • Oil /Gas /Petrochemical
  • Industrial / Commercial
  • OEM
  

      METAL SEAT NON-RISING STEM GATE VALVES SERIES 2200                                                                              

MODEL: 2200
SIZE: 2" to 12"
PRESSURE:  Class 125
TEMPERATURE: 14°F to 248°F
FLANGE: Class 125 

  

MODEL: 2050
SIZE: 3/4" to 4"
PRESSURE:  232 PSI
TEMPERATURE: 14°F to 248°F
CONNECTION: NPT or Metric Thread
OPERATION:   Handwheel / Operating Nut

  

MODEL: 2200H
SIZE: 2" to 24"
PRESSURE:  Class 125 / 250
TEMPERATURE: 14°F to 248°F
FLANGE: Class 125 / 250
                   

  

    SERVICE:  On / Off
  

OPERATION: Handwheel / Gear

  

STANDARD: MSS SP-70

  

STANDARD: MSS SP-70

  

OPERATION: Handwheel/Operating Nut/Gear

  

STANDARD: MSS SP-70

  

    MATERIALS SPECIFICATION:
  • BODY: Ductile Iron 
  • SEAT: Bronze
  • WEDGE TRIM: Bronze
  • BONNET: Ductile Iron / St. Steel AISI 420
  • WEDGE: Ductile Iron
  • WEDGE NUT: Bronze
  • STEM: Brass
  • STUFFING BOX: Ductile Iron
  • PACKING: Graphite, non-abestos
  • GASKET: Graphite, non-abestos
  • GLAND: Ductile Iron
  • HANDWHEEL: Ductile Iron

    MATERIALS SPECIFICATION:
  • BODY: Cast Iron / Ductile Iron
  • SEAT: Bronze
  • WEDGE TRIM: Bronze
  • BONNET: Cast Iron / Ductile Iron
  • WEDGE: Cast Iron / Ductile Iron
  • STEM NUT: Bronze
  • STEM: Brass / Stainless Steel AISI 420
  • PACKING: Graphite, non-abestos
  • GASKET: Graphite, non-abestos
  • HANDWHEEL: Cast Iron / Ductile Iron

MODEL: 2200G
SIZE: 2" to 12"
PRESSURE:  Class 125
TEMPERATURE: 14°F to 248°F
GROOVE ENDS : AWWA C606 

  

 Ruggedly designed gate valves  with metal to metal seating to last for decades.  V alves can provide bi-directional service. These  valves  offer an excellent flow passage and low  pressure drop being an optimal choice for  slow on / off duties on non corrosive  media,  steam, gas, oil, fats and air.  Valves are fully coated with a fusion-bonded blue epoxy conforming to AWWA C550.              Suitable for buried service or field applied topcoats.
    SERVICE:  On / Off
  

    APPLICATIONS:  Cold/Hot Water supply; Potable Water;
                                    Waste / Sewage; Industrial / Commercial;
                                    HVAC / OEM.
      NOTE: Valves can be suppied with multi-turn electrical actuators.
     

      METAL SEAT OS&Y GATE VALVES SERIES 2300                                                                                                   

 Ruggedly designed gate valves  with metal to metal seating to last for decades.  V alves can provide bi-directional service.             These valves  offer an excellent flow passage and low  pressure drop being an optimal choice for  slow on / off duties on non corrosive  media,  steam, gas, oil, fats and air. Valves are fully coated with a fusion-bonded blue epoxy conforming to AWWA C550.  
MODEL: 2300
SIZE: 2" to 24"
PRESSURE:  Class 125 
TEMPERATURE: 14°F to 248°F
FLANGE: ANSI Class 150/300

  

MODEL: 2300H
SIZE: 2" to 24"
PRESSURE:  Class 125 / 250
TEMPERATURE: 14°F to 248°F
FLANGE: Class 125 / 250
                   

  

OPERATION: Handwheel or Gear
SERVICE: On / Off
STANDARD: MSS SP-70

  

OPERATION: Handwheel or Gear
SERVICE: On / Off
STANDARD: MSS SP-70

  

MODEL: 2300G
SIZE: 2" to 12"
PRESSURE:  Class 125
TEMPERATURE: 14°F to 248°F
GROOVE ENDS : AWWA C606
STANDARD:  MSS SP-70
OPERATION: Handwheel or Gear
SERVICE: On / Off

  

    MATERIALS SPECIFICATION:
  • BODY: Ductile Iron
  • SEAT: Bronze
  • WEDGE TRIM: Bronze
  • BONNET: Ductile Iron
  • WEDGE: Ductile Iron
  • STEM NUT: Bronze
  • STEM: Stainless Steel AISI 420
  • PACKING: Graphite, non-abestos
  • GASKET: Graphite, non-abestos
  • YOKE: Ductile Iron
  • HANDWHEEL: Ductile Iron

    APPLICATIONS:  Cold/Hot Water supply; Potable Water; Waste Water / Sewage,
                                    Industrial / Commercial;  HVAC / OEM.
    ADVANTAGES:  Valve status is easy observable, which can be important on large and complex
                                   manifold systems; Stem thread is isolated from the fluid.
    NOTE: Valves can be suppied with multi-turn electrical actuators.
     

      AWWA C509 RESILIENT SEAT OS&Y GATE VALVE - MODEL 2300RS                                                                   

MODEL: 2300RS
SIZE: 2" to 12"
PRESSURE RATING: 150/200/250 PSI
TEMPERATURE: 14°F to 248°F
FLANGE: ANSI Class 125
FACE-TO-FACE DIMENSION: ANSI B16.10

  

    MATERIALS SPECIFICATION:
  • BODY: Ductile Iron
  • SEAT: Bronze
  • WEDGE TRIM: Bronze
  • BONNET: Ductile Iron
  • WEDGE: Ductile Iron
  • YOKE NUT: Bronze
  • STEM: Brass / St. Steel AISI 420
  • YOKE: Ductile Iron
  • PACKING: Graphite, non-abestos
  • GASKET: Graphite, non-abestos
  • GLAND: Ductile Iron
  • HANDWHEEL: Ductile Iron

OPERATION: Handwheel / Gear

  

    MATERIALS SPECIFICATION:
  • BODY: Ductile Iron
  • SEAT: Bronze
  • WEDGE TRIM: Bronze
  • BONNET: Ductile Iron
  • WEDGE: Ductile Iron
  • STEM NUT: Bronze
  • STEM: Stainless Steel AISI 420
  • PACKING: Graphite, non-abestos
  • GASKET: Graphite, non-abestos
  • HANDWHEEL: Ductile Iron

    APPLICATIONS:  Cold/Hot Water supply; Potable Water; Waste Water / Sewage,  Industrial / Commercial; HVAC / OEM.                              
     ADVANTAGES:  Valve status is easy observable, which can be important on large and complex manifolds; Stem is isolated from the medium.
                                    Valve has superior sealing and lower abrasion in comparison to other packing designs.  Disc is completely encapsulated
                                    with high performance EPDM rubber. This provides superb sealing performance.
                                    
                                    NOTE: Valves can be suppied with multi-turn electrical actuators.
                                     
     

    MATERIALS SPECIFICATION:
  • BODY, BONNET: Ductile Iron
  • DISC: Ductile Iron with Buna-N/EPDM/FPT
  • STEM: Stainless Steel/Brass
  • HANDWHEEL: Ductile Iron
  • TESTING STANDARD: AWWAC509

OPERATION: Handwheel / Gear

  

      KNIFE GATE VALVE - MODEL 2500                                                                                                                         

MODEL: 2500
SIZE: 2" to 24"
PRESSURE:  Class 125 
TEMPERATURE: 14°F to 266°F
FLANGE: Lug Type ANSI Class 125/250 
OPERATION: Handwheel / Gear Box

  

POWDER EPOXY COATING:  Size 2" - 12"
LIQUID EPOXY PAINTED: Size 14" - 24"

  

    MATERIALS SPECIFICATION:
  • BODY: Cast Iron / Ductile Iron
  • SEAT: Bronze
  • WEDGE TRIM: Bronze
  • BONNET: Cast Iron / Ductile Iron
  • WEDGE: Cast Iron Ductile Iron
  • STEM NUT: Bronze
  • STEM: Brass / St. Steel AISI 420
  • YOKE: Cust Iron / Ductile Iron
  • PACKING: Graphite, non-abestos
  • GASKET: Graphite, non-abestos
  • GLAND: Ductile Iron
  • HANDWHEEL: Cast Iron / Ductile Iron

    MATERIALS SPECIFICATION:
  • BODY: Cast Steel / Cast Iron
  • SEAT GASKET: EPDM
  • UPPER GASKET: EPDM
  • STEM: 420 St.Steel
  • GATE (WEDGE) : 304 St. Steel
  • PRESSING BAR / PIN: 304 St.Steel
  • STUDS: Carbon Steel
  • TOP FLANGE: Cust Iron
  • PACKING: PTFE
  • FASTENERS: Carbon Steel
  • HANDWHEEL: A36 Steel

    APPLICATIONS:
  •  Pulp and Paper Production
  • Water / Water Treatment / Wastewater
  • Chemical: powdery / crystallizing products
  • Pulverized Products: cement, etc.
  • Petrochemical Industry
  • Power / Steel Production / Mining
  • Brewery Industry / Wineries
  

NOTE: Valves can be suppied with multi-turn electrical actuators.
NOTE: Knife gate valves should be used for 
handling fibrous materials, heavy thick liquids and liquids with hard particles.

      CLASS 150-300-600 API 600 OS&Y FULL PORT GATE VALVES - MODEL 2600                                                    

MODEL: 2600 Class 150 / 300 / 600
SIZE: 2" to 48"
PRESSURE RATING: ASME Classes 150-600
CONNECTIONS: Flange Class 150/300/600; 
                                Buttweld ends

  

DESIGN STANDARDS: API 600 & ISO 10434;  ASME B16.34

END-TO-END DIMENSIONS: ASME B16.10 & ISO 5752

FLANGED DIMENSIONS: ASME B16.10 & ISO 7005-1 Part 1

BUTTWELD DIMENSIONS: ASME B16.25

PRESSURE RATING: API 598 & ISO 5208; MSS SP-61

VISUAL INSPECTION: MSS SP-55

MARKING: MSS SP-25 & ISO5209

    MATERIALS SPECIFICATION:
  • BODY & BONNET: ASTM Carbon Steel A216 Gr. WCB / ASTM A217 Cast Alloy Steel / ASTM A352 LCB Low Temp. Carbon Steel
  • WEDGE: ASTM Carbon Steel A216 Gr. WCB+Cr13 / 304 St. Steel / 316 St. Steel
  • STEM: 410 St. Steel / 304 St. Steel / 316 St. Steel
  • SEAT RING: A105 Carbon Steel+Cr.13 / 304 St. Steel / 316 St. Steel
  • STEM BACK SEAT: 410 St. Steel 
  • BONNET GASKET: Flexible Graphite + 304 S.S.
  • BONNET STUD: ASTM A193 Gr.B7 Alloy Steel / ASTM A193 Gr.B16 Alloy Steel / ASTM A320 Gr.L7 Alloy Steel
  • BONNET STUD NUT: ASTM A194 Gr.2H Carbon Steel / ASTM A194 Gr.7 Carbon Steel /  ASTM A194 Gr.4 Carbon Steel 
  • STEM PACKING: Flexible Graphite
  • GLAND: 420 St. Steel / 304 St. Steel
  • GLAND FLANGE: ASTM Carbon Steel A216 Gr. WCB / ASTM A217 Cast Alloy Steel / ASTM A352 LCB Low Temp. Carbon Steel
  • EYEBOLT: A193 Gr. B7 Steel
  • EYEBOLT PIN: Carbon Steel / Alloy Steel / A352 LCB Low Temp. Carbon Steel
  • EYEBOLT NUT: ASTM A194 Gr.2H Carbon Steel
  • GREASE FITTING: Brass + Steel
  • YOKE SLEEVE: Aluminum-Bronze (Ductile Ni-Resist optional)
  • YOKE SLEEVE JAM NUT: Carbon Steel
  • HANDWHEEL NUT: Carbon Steel
  • HANDWHEEL: Malleable Iron

    APPLICATIONS:
  •  Steam, Air, Gas, Oil;
  • Chemical & Petrochemical Industries.

              SERVICE: On/Off

  

    FEATURES AND BENEFITS:
  •  Full Port Design
  • Bolted Bonnet
  • Fully Guided Flexible Wedge
  • Choice of Solid or Split Wedge
  • Optional Boxed Gear Operation
             
  

  • Replaceable Seat Rings
  • Forged T-Head stem
  • Rising Stem and Non-Rising Handwheel
  • Option of Flanged or Buttweld Ends
  • ASME Classes 150–300: 1⁄16” raised face.
    ASME Class 600:             1⁄4” raised face.
MODEL: 2680 Class 800
SIZE: 3/8" to 2"
PRESSURE RATING: ASME Class 800 (1975 PSI @ 100 F°)
CONNECTIONS: Flange Class 150/300/600; Threaded;
                                Buttweld ends; Socket Weld ends.

  

DESIGN STANDARDS: API 602;  ASME B16.34

END-TO-END DIMENSIONS: ASME B16.11

FLANGED DIMENSIONS: ASME B16.15

SOCKET WELD ENDS: ASME B16.11

BUTTWELD DIMENSIONS: ASME B16.25

THREADED ENDS: ASME B 1.20.1

INSPECTION AND TEST: API 598 

    APPLICATIONS:
  • Steam, Air, Gas, Oil;
  • Chemical & Petrochemical Industries.
  • Nuclear Power
  • Refining / Mining
  • High Temp / Pressure
  • Water/Wastewater
               SERVICE: On/Off
  

    FEATURES AND BENEFITS:
  • Bolted Bonnet
  • Fully Guided Replaceable Seat Rings
  • Yoke integral with Bonnet
  • Rising Stem
  • Option of Flanged, Buttweld, Socket weld or Threaded Ends             
      

    MATERIALS SPECIFICATION:
  • BODY & BONNET: ASTM Carbon Steel A105 / ASTM 316 S.S. / ASTM A182 Gr. F11 Carbon Steel
  • WEDGE: ASTM A182 Gr. F6a Carbon Steel / ASTM 316 S.S. / ASTM A182 Gr. F6a Carbon Steel+HF
  • STEM: ASTM A276-410 S.S./ ASTM A276-316 S.S./  ASTM A276-410 S.S.
  • SEAT RING: ASTM A276-410 S.S. / ASTM 316 S.S. /  ASTM A276-410 S.S+HF
  • STEM BACK SEAT: 410 St. Steel 
  • BONNET GASKET: Flexible Graphite + 304 S.S./ Flexible Graphite + 316 S.S / Flexible Graphite + 304 S.S.
  • BONNET STUD: ASTM A193 Gr.B7 Alloy Steel / ASTM A193 Gr.B8M St. Steel / ASTM A193 Gr.B16 Hi-Pressure, Hi-Temp Steel
  • PACKING: Graphite
  • GLAND: ASTM A276-410 S.S./ ASTM A276-316 S.S./ ASTM A276-410 S.S.
  • GLAND FLANGE:  ASTM Carbon Steel A105 / ASTM 316 S.S. / ASTM A182 Gr. F11 Carbon Steel
  • EYEBOLT PIN: ASTM A276-410 S.S./ ASTM A276-316 S.S./ ASTM A276-410 S.S.
  • EYEBOLT NUT: ASTM A194 Gr.2H Carbon Steel / A194 Gr.8M - 316 S.S./ ASTM A194 Gr.2H Carbon Steel
  • EYEBOLT: ASTM A193 Gr.B7 Alloy Steel / ASTM A193 Gr.B8M St. Steel / ASTM A193 Gr.B16 Hi-Pressure, Hi-Temp Steel
  • YOKE SLEEVE:  ASTM A276-410 S.S.
  • HANDWHEEL NUT: Carbon Steel
  • HANDWHEEL: Malleable Iron

    RESILIENT SEAT NON-RISING STEM GATE VALVES SERIES 2000                                                                        

      CLASS 800 API 602 OS&Y FORGED STEEL GATE VALVES - MODEL 2680                                                            

 TOP